Other

- Add to older versions of the SuperStand to extend height to accept 29er wheels

Replace an old Topeak babyseat or just change color for a new look. - Replacement Pad Set only for Topeak Baby Seat II

A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

The NEO Track replaces the front wheel support of the NEO and enables you to steer freely in the Tacx Trainer software 4, Advanced (Windows PC). The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to decide yourself where to go to when training in virtual worlds. The NEO Track is only suitable for the NEO Smart in combination with the Upgrade Smart (Tacx Trainer software 4, Advanced and ANT+ antenna required). - Communicates wirelessly with the computer via ANT+ - Rubber caps on the bottom prevent sliding and reduce noise - Foldable, lightweight and easy to store

TYR's Soft Silicone Ear Plugs mold easily to your ears for a comfortable, watertight seal. A storage case is also included to keep your ear plugs clean.

A must for any swimmer, TYR's Anti-Fog Spray keeps your goggles and glasses clean and prevents them from fogging.

TYR's Crossblade fins are a great all-around training fin. By combining the best of a short blade fin for tempo work and a long blade fin for building power, you get the best of both worlds with one set of fins.

TYR's Burner EBP Fins are a great training tool for building strength while maintaining a high cadence kick. The ultra-soft, high-buoyancy rubber helps elevate your lower body to maintain proper position. There's even a Wall Gripper Footpad so you can push off from the wall with confidence.

You can proudly display these Surly Logo Stickers just about anywhere they'll fit. They comes in three sizes to meet a wide range of sticking needs.

Surly's Junk Straps can secure almost anything to almost anything else. Essentially an extra long toe strap, they're easy to use and store. And, trust us, these handy straps will get used often.

Frame Stickers/Decals and a headbadge for repairing or repainting your Surly Cross Check.

Stickers/Decals for repairing or repainting your Surly Instigator frame. - Includes headbadge

Stickers/Decals for repairing or repainting your Surly Krampus frame. - Includes headbadge

Long Haul Trucker frame decals. - Dry transfer style - Includes headbadge

Surly Moonlander Decals are for putting on your bike. Then you go float some trail. - 100% sweet - Dry transfer style - Includes headbadge

Stickers/Decals for repairing or repainting your Surly Pack Rat. - Includes headbadge

Stickers/Decals for repairing or repainting your Surly Steamroller. - Includes headbadge

The Surly Deck Pad is the ultimate in cargo bike derrière accessories. Sold individually, the Surly Deck Pads are designed to easily attach to the rear decks of our Big Easy, Big Dummy and Big Fat Dummy for a luxurious passenger riding experience. Simply put, they make riding on the back of our cargo bikes even nicer. Two Pads will cover the whole deck, so there, now you know. You could probably even convince your ride-along friends or children to chip in and help pay for them. After all, nobody rides for free. - The Deck Pad mounts to the Dummy Deck to provide a soft platform for passengers large and small - Sold each - Also available as part of the Corral Kit - Individual Deck Pads measure approximately: 13”x8”x2”

The Surly Deck Bar is just what it sounds like, a convenient handlebar that attaches to the rear deck of the Big Easy, Big Dummy or Big Fat Dummy. Once attached, you will find that this is a very nice place for your passengers to grip and hold on tight while you cart them around town. I mean it’s that or the old uncomfortable around the waist hug move. You can decide what’s best for you and your passengers. Grips are also included with the bar, so you’ve got that going… - The Deck Bar attaches directly to the Dummy Deck to offer a secure hand grab for passengers - Provides a solid, comfortable handhold for riders large and small - Also available as part of the Corral Kit

The Surly Kid Corral is just that: A Corral where you can store your kids when they’re riding on the deck of your Big Easy, Big Dummy, or Big Fat Dummy. Designed to be semi-modular, the corral offers up different configurations to fit your unique human-corralling needs. As your family grows in size or number, you can adjust the Kid Corral to give your tiny humans more or less freedom. The Kid Corral Kit comes equipped with a full safety rail system, two soft Deck Pads, and a Deck Bar comfortable enough for tiny paws. As an added bonus, the Kid Corral system is tested and compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions. - Semi-modular system is designed to easily add or remove sections of the corral rails to fit your passenger safety needs - Kit includes the full safety rail system, two soft Deck Pads, Deck Bar and required mounting hardware - The Kid Corral system is also compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions

This pair of Sunlite M5x20 bolts with 6mm spacers is perfect for when components and accessories interfere with each other and additional space is needed. - Makes room for derailleurs, fenders, racks and more - Size: M5 x 20mm w/6mm spacer

• Forged alloy construction • Center mount design • 285mm w/top plate • Cut to length • Foot boot included

Sunlite's Polo Seat Rail is the right part for mounting Sunlite's Polo Saddles on your favorite bike (Sunlite's Polo Saddles are sold separately and also sometimes called "banana seats"). To install, the seat's clamp fits onto the seatpost and the Seat Rail attaches to the rear wheel axle and the back of the Polo Saddle to support it. The Seat Rail has several mounting positions for getting your saddle in the most comfortable position. This sturdy-steel strut (also called a "sissy bar") boasts a beautiful polished-chrome finish to match your rig's smooth style. The 36-inch model has a built-in backrest that extends above the seat.

• Gray

• Forged aluminum construction • Center mount design

• Rear mount • Fits 26" wheels

•Uses one 9v battery (not included) •Fits most handlebars

• Plastic riser block allows the position of front wheel at one of two heights